DLE Engines DLE-35RA Rear Exhaust Gas
Sold by HOBBY LOBBY PAKISTAN
Out of stock
Easy Installments by LeyJao
Rs 4,650/mo × 12Buy on monthly installments financed by LeyJao — no bank or third party involved.
| Plan | Monthly | Duration | Total payable |
|---|---|---|---|
| 12-month plan | Rs 4,650 | 12 months | Rs 55,800 |
View monthly schedule
| Month 1 | Rs 4,650 |
| Month 2 | Rs 4,650 |
| Month 3 | Rs 4,650 |
| Month 4 | Rs 4,650 |
| Month 5 | Rs 4,650 |
| Month 6 | Rs 4,650 |
| Month 7 | Rs 4,650 |
| Month 8 | Rs 4,650 |
| Month 9 | Rs 4,650 |
| Month 10 | Rs 4,650 |
| Month 11 | Rs 4,650 |
| Month 12 | Rs 4,650 |
Payment options
Cash on Delivery · Online payment · Easy Installments by LeyJao
Description
Features:
High performance in a compact packageRear exhaust for the perfect tuned pipe setupNewly designed piston with the re-engineered skirt for less pistonweight resulting in such advantages as awesome throttle response,more power, and longer engine lifeElectronic ignition is the no-hassle answer to simpler starts,higher performance, and minimal RF noise **Ignition Sensoravailable separately**Producing 400 more rpm than the DLE30, the DLE 35-RA comes withengine standoffs, electronic ignition, spark plug and mufflerTwo-year limited warranty through Hobby Services beginning at date
of purchase
| INCLUDES |
DLE 35-RA Gasoline EngineElectronic IgnitionMufflerDLE CM6 Spark PlugFour Engine Standoffs with Mounting HardwareIntegrated Choke Rod GuideRear-mounted Carb
Instruction Manual
| REQUIREMENTS |
Gasoline with at least 87 octane rating2-cycle oil, mix ratio for this engine is 30 parts gas to one partoil and must be followed exactly for warranty considerationand optimum performance
4.8 – 8.4V battery for ignition (separate receiver pack can be used)
**NOTE, 1st version ignition is marked ‘A-01’ on the label andrequires a regulator if using a 2S LiPo/LiFe batteryIf the ignition module is the A-02 model it has a built-in voltageregulator. Model A-02 designation is located above the word
“Ignition” on top of the case**
Propeller and field equipment
| SPECIFICATIONS |
Displacement: 34.5 cc (2.13 cu in) Bore: 1.5 in (38.5 mm) Compression Ratio: 7.6:1 Static Thrust: 9.5kg Pulling Force/100 meters altitude 7.8kg Pulling Force/1,800 meters altitude Gasoline/Oil Mixture: 30:1 Gasoline Octane Rating: 87 Recommended Propellers: 18×10, 19×8, 20×8, 20×10 Weight, engine: 2.06 lb (936 g) Weight, muffler: 2.61 oz (74 g) Weight, ignition module: 5.26 oz (147 g) Output: 4.1 hp @ 8,500 RPM Carburetor Adjustments; Low Speed Needle: 1.1 turns out as a starting point, adjust for a smooth idle and a reliable transition to high throttle High Speed Needle: 1.5 turns out from closed, adjust needle to peak RPM, if engine slows or dies at full throttle, the high-speed mixture is likely too lean Muffler Dimensions: 3.6 x 2.3 x 1.3″ (92 x 58 x 33mm) Exhaust Outlet Length: 1.9″ (48.5mm) Exhaust Outlet Diameter: 0.63″ (16.1mm) Distance Between Mounting Hole Centers Same Side: 2.1″ (54mm) Distance Between Mounting Hole Centers Opposite Side: 3.1″ (80mm) Height from bottom/Crankcase to top of Cylinder Head: 5.4″ (138mm) Width of Cylinder Head: 2.5″ (65mm) Distance Between Muffler Mounting Hole Centers: 1.6″ (40mm)